|
|
Spray Foam Insulation Tyler, TXWelcome to East Texas Spray Foam Insulation. Our company is situated in Eastern Texas between Longview and Tyler and we’ve been serving these two cities for many years now with the highest quality spray foam insulation Tyler, TX has to offer, consistently creating positive experiences for our customers.
We especially prioritize quality, efficiency as well as safety. Our services apply to both old and new construction and have a team that is extremely focused, trained and experienced in order to get any insulation job done right. Using spray foam is the best way to insulate your home. If you’re looking for the best Tyler, TX spray foam insulation services, your search has ended. In partnership with Tri-Lakes Spay Foam, we offer the highest quality insulation services at the best prices in Tyler, Texas.
|
|
About Spray Foam Insulation
|
Spray foam is made by mixing two chemicals; isocyanate and polyol. A mixture of these two chemicals will cause them to react and expand up to almost sixty times their size. The expanded mixture of these two chemicals is the spray foam which is used in home and commercial insulation.
Spray foam insulation is an insulator and air barrier material that forms a protective layer sealing floors, walls, as well as ceiling cavities to prevent air movement. It is also applied to spaces around light fixtures and electrical outlets, not to mention where walls meet up with doors and windows. It is an alternative to conventional building insulation and is fast on the rise in the United States. It’s been in use for more than 30 years now and is continuously growing as an effective insulator. However, it can be a bit pricier than other conventional types of insulation, such as fiberglass, expanded polystyrene (EPS), cellulose or foam board insulation. |
|
Various ApplicationsUsing spray foam insulation in Tyler, TX is one of the best ways to cut down on your energy bills. In a study conducted by the U.S. Department of Energy, it was found out that homes which had a complete insulation system had significantly lower utility bills than homes which didn’t have any insulation system.
Moreover, spray foam can act as both a moisture barrier and an air barrier. As asserted by Andrew Raquet, spray foam is commonly used for crawlspace insulation due to its ability to prevent water collection and the growth of molds at these crawlspaces. As an air barrier, spray foam will prevent the infiltration of air through cracks, crevices and, gaps in your home. Moreover, since spray foam has a high R-value; it can largely reduce the levels of heat transfer within your home. Spray foam can also be used as soundproof insulation, due to its capacity to prevent the entry of unwanted noise into your house. |
|
Open-cell and Closed-cell Foam InsulationThere are two types of spray foam insulation; open cell and, closed cell. Generally, closed cell foam insulation is more expensive and, more durable than open cell insulation. Closed cell insulation gives much better results than open cell insulation. However, open cell spray foam is most suitable for insulating indoor areas. It is an excellent alternative too if you can’t afford closed-cell foam insulation.
|
Health and Safety Risks of InsulationTyler, TX Spray Foam Insulation is 100% safe; and it does not pose any health and safety risks. Spray foam insulation is fire resistant, unlike cellulose and fiberglass insulation which can quickly catch fire.
Other types of traditional insulation materials contain formaldehyde, which is a very poisonous chemical. Spray foam doesn't contain formaldehyde. When you use fiberglass and cellulose insulation instead of spray foam; you may suffer serious health complications due to the effects of formaldehyde. Some of these complications are headaches, asthma and, skin rashes. |
|
What to Expect with East Texas Spray Foam InsulationWhen you contact us for foam insulation services, our insulation company will make a preliminary visit to your home. At the initial visit, the insulation contractors will assess the board footage of the area where you want to apply spray foam and, remove all the existing insulation at that area.
Immediately after the preliminary visit, our crew will proceed to insulate your house with spray foam. Our insulation contractors will apply spray foam at the designated areas using a hosepipe. After applying spray foam, our crew will tidy up your house and leave it organized and sparkling clean. To create spray foam, two liquids need to be combined through a chemical reaction, which then results in the spray polyurethane foam. These two liquids come in different containers or drums. Contractors usually label one container as “A” side and the other as the “B” side.
The “A” side of the spray polyurethane system comprises polymeric methylene diphenyl diisocyanate (pMDI) and methylene diphenyl diisocyanate (MDI). The “B” side usually comprises of a blend of blowing agents, catalysts, polyols, surfactants and flame retardants. |
|
Why Spray Foam Insulation in Tyler, TX
Superior InsulatorSpray foam insulation actually works better than some of the other common types of insulation. And because of its expansive properties, it is able to spread and seal off any corner that may have otherwise, been left exposed and vulnerable. The resistant value of spray foam, which is also its ability to provide an air-tight seal, is ranked R-6, which is said to be the highest rank in the market today.
|
|
Better Energy SavingsGiven that spray foam is a strong insulator, businesses and homeowners can save up on energy costs. As a matter of fact, spray foam insulation can help people save up on energy at about 50% on average or more, which is more than other types of insulation that are around 30%.
|
|
Moisture BarrierAny cracks or holes in walls or crawl spaces would not just let in air, but also water and moisture if those spots aren’t covered immediately. Spray foam is extremely impermeable to water, which means that not only will this foam protect your attic and crawl spaces from uninvited leaks and moisture, but it will also prevent flooding. This is because unlike other types of insulation, spray foam won’t be able to absorb water.
|
|
Airtight SealingAs discussed earlier, spray foam insulation is highly capable of sealing all of the holes and cracks in your crawl space and attic. This is a good thing since air leaks are what lead to high energy costs for your house. The invulnerable airtight seal that is formed by spray foam insulation is about 24 times less permeable to air infiltration than other insulation types.
|
|
Long LifespanSpray foam insulation comprises an inert polymer material that enables it to have an eternal shelf life. This means that several businesses and households can enjoy the advantages of spray foam insulation for about two decades to come before they can even think about re-insulating. Plus, the money that people save with this kind of foam for that much of time is great value that comes with their investment.
|
|
Mold DeterrentThe inert polymer material also prevents any chances for bacteria or mold to collect or form around those tiny little corners that our cleaning dusters and brooms can’t seem to reach. Closed-cell insulation is what provides households with the best protection against mildew and mold.
|
|
Environmentally FriendlyOne of the most common questions that get asked around is whether spray foam insulation is eco-friendly or not. Well, we’re here to tell you that the answer to that is indeed true. And there are a handful of reasons for that. The spray foam, as we said earlier, helps reduce energy consumption, giving homeowners a ‘green’ household. It also protects the occupants against moisture, which leads to the growth of mold and mildew. And because it’s designed to last for decades, it produces less consumed materials.
|
|
Spray Foam Insulation CostAs illustrated by Do It Yourself, the cost of spray foam insulation in Tyler, TX varies. Depending on the size of the square footage of the area you want to apply spray foam and the type of foam insulation you want. To install a closed cell sprayed insulation system, you may spend $0.90 - $1.50 per square foot. On the other hand, open-cell spray insulation may just cost you $0.25 - $0.50 per square foot.
|
|
Professional Insulation Installers in Tyler, TexasUnless your renovation or remodeling project is small, there should be no reason for you not to hire a professional insulation contractor in Tyler, Texas. Since you’re not an expert, you’ll be facing a number of problems if you opt to do it yourself spray foam insulation. Some of those problems include:
|
|
Once you’ve received a quote from your contractor, that’s when you know that installation is ready to commence. The first thing that’s going to happen is that the crew responsible for the installation will visit your home and remove any existing insulation from those spaces or areas that need to be insulated.
The following day will see the crew coming over to your place and then have a hose that runs to the area you plan on insulating, which could be either a crawl space, attic, or rim joist. Pole barns and walls that haven’t been covered in new buildings or constructions can also be sprayed with foam insulation, as does concrete block walls.
The following day will see the crew coming over to your place and then have a hose that runs to the area you plan on insulating, which could be either a crawl space, attic, or rim joist. Pole barns and walls that haven’t been covered in new buildings or constructions can also be sprayed with foam insulation, as does concrete block walls.
|
|
|
|
|
|
Contact Us
|
Our goal at East Texas Spray Foam Insulation is to provide the best insulation services to homes situated in East Texas, including Tyler, TX. Our insulation company is made up of skilled contractors who are competent, reliable and, professional. So, if you’re looking to hire the best spray foam insulation Tyler, TX has to offer, call us today and our insulation contractors will be with you in a heartbeat. |